Akcija

AL - TERM PIR LT

0.00 € 0.00 € 0.0 EUR

0.00 €

• Minimum order from 200 m².

• For the exact price, please contact us by e-mail. by mail or phone!

Select:

Width
Length
Height
Joint type
λ
- 0,022 W (m۰K)

Ši kombinacija neegzistuoja.

m²

Add to cart

SKU:

N/A

Categories:

PIR Termo ,

PIR Term ,

Roof ,

Walls ,

Floors ,

Attic ,

Flat roofs and terraces ,

Exterior walls ,

AL - Term Pir LT

These are modern and effective insulation materials that help avoid thick and heavy constructions!

"Polyisocyanurate (PIR) panels" are a revolution in the thermal insulation market. One panel insulates heat almost twice as well as stone or mineral wool of the same thickness. PIR Soft board is a very versatile building material. Panels can be laid on floors, three-layer walls, flat, green or pitched roofs. The panels can be attached to the rafters of pitched roofs, thus avoiding problems related to the formation of frost bridges.

The main properties of PIR panels: high resistance to compression, durability, the panels do not lose their insulating properties over time, lightness - the relatively smaller thickness of the insulation and the low density of the material from which the panels are made reduce the total weight of the roof - this helps to reduce the cost of the supporting structure by up to 15-20% .

*We accept individual orders from 200m2; We combine smaller ones with other orders;

*Standard measurements 1200 x 600; 1200 x 2400; Please contact us for other measurements;

*Fast production terms and the ability to quickly process large orders;

PIR AL šilumos izoliacinės plokštės pagamintos iš stovų poliuretano putų (PIR) šerdies ir iš abiejų pusių padengtos daugiasluoksne aliuminio folija. Plokštės labai mažu šilumos laidumo koeficientu (λD 0,022 W/mK), todėl reikia iki dviejų kartų plonesnio izoliacinio sluoksnio, nei montuojant kitas izoliacines medžiagas. Aliuminio folijos sluoksnis veikia ir kaip garų barjeras, užtikrinamas konstrukcijos sandarumas.

You don't have to share your home with rodents and insects, and you don't have to worry about fungus or mold.

Connection types

Milled edges facilitate installation and increase thermal insulation.

01. FIT

(flat milling from 20 to 250 mm)

02. LAP

(gradual milling from 30-250 mm)

03. TAG

(tongue and groove from 40-250 mm)

Specifikacijos AL - TERM PIR LT

Length	600 mm or 1000 mm or 1200 mm or 1800 mm or 2400 mm or 2500 mm or 3000 mm or 3200 mm or 3250 mm or 3850 mm
Height	20 mm or 30 mm or 40 mm or 50 mm or 60 mm or 70 mm or 80 mm or 90 mm or 100 mm or 110 mm or 120 mm or 130 mm or 140 mm or 150 mm or 160 mm or 170 mm or 180 mm or 190 mm or 200 mm or 210 mm or 220 mm or 230 mm or 240 mm or 250 mm
Joint type	FIT - flat or LAP or TAG
Width	1200 mm
λ	0,022 W (m۰K)

termPIR-AL--nr.15 deklaracija.pdf

High level of thermal insulation: λ D = 0.022 W/mk.

Hardness and damage resistance - σ10 = 150kPa.

Does not deform during use. They are light - only 120 mm thick panel weighs 3.6 kg/m2.

High water resistance - water absorption less than 2%

They can be installed all year round, they do not absorb water.

Resistance to biological and chemical factors.

Installation of PIR AL:

Polyurethane adhesives are used for fastening to structures and to each other. When laying panels in several layers, the seams of the lower and upper layers must overlap and not overlap.

Storage:

It is recommended to store the panels indoors, protect them from direct sunlight.

Features of PIR AL:

Excellent thermal insulation λD=0.022 W/mK;
Up to two times less thickness of the insulating layer compared to other insulating materials;
There is a small weight, so it does not burden the building structure (35 kg/m³);
Extremely tight;
Stable dimensions;
Longevity;
Does not release particles or gases hazardous to health;
Allows to increase the useful area of the building;
There is a universal solution for walls and roofs.